Automatic Fruit Crushing and Juicer Machine can automatically complete the crushing, juicing and residue discharging process of various fruit and vegetable. Romiter Juice Making Machine is made of stainless steel, which is healthy, durable and easy to clean. It adopts a screw extrusion principle, which having a high juice yield. With the crushing device mounted, this juicer machine crushes the materials first before extracting the juice. There is no need for extra crusher. the residues and juice are separated automatically after juice extractor and the filter screen has various mesh sizes for your choice. Nowadays, It is widely used for juicing apple, pineapple, pear, orange, lemon, strawberry, blueberry, mulberry, cranberry, buckthorn, grape, kiwi fruit, passion fruit, watermelon, papaya, tomato, carrot, cucumber, beet, garlic, ginger, spinach, celery, aloe, cactus, etc.
Working Principle of Fruit Crushing and Juicer Machine
The crushing device is installed above the feed hopper of the screw juicer. There are four groups of fly knives and one group of dead knives inside the crushing device. The fly knives driven by the motor rotate between the dead knives, thus crushing the materials into 2-5 mm pieces, which then enter the spiral juicing system directly.
The main component of the spiral juicing system is the screw. The screw shaft rotates clockwise in the direction of the residue outlet. The bottom diameter of the screw increases gradually while the thread pitch gradually decreases. When the materials are propelled by the screw, with the reduction of the volume of the screw chamber, the materials are pressed. The juice flows into the juice holding device through the filter screen, while the residues are expelled through the gap between the screw and the pressure adjusting head.
The juice yield of the vegetable juicer machine can be adjusted by rotating the handwheel bearing support. When turning it clockwise in the direction of the feed hopper, the pressure adjusting head will move left and the gap will be smaller, otherwise, the gap will be larger. As the gap size changes, the residue discharge resistance will change, thus changing the juice yield of the fruit juice machine.
juice extracted by fruit crushing juicer machine
Maintenance of Fruit Juice Making Machine
- After the fruit juice machine enters the normal working condition, please adjust the gap to the maximum and then reduce gradually to the ideal condition. If the raw material doesn’t come out from the crusher, clean it with the residue removal rod.
- After every shift, please wash the filter screen with water and brush to remove the residue from the vegetable juicer machine manually. Wash the whole machine with hot water after finishing juicing.
Specification of Fruit Juice Extractor Machine
| Model | RM-JUEX500C | RM-JUEX1000C | RM-JUEX1500C |
| Treatment capacity | 500kg/h | 1000kg/h | 1500kg/h |
| Overall dimension(mm) | 1000*330*1220 | 1150*380*1220 | 1500*480*1400 |
| Weight(kg) | 115 | 155 | 280 |
| Power(kw) | 1.5+3KW | 1.5+4.5 | 3-7.5KW |
| Screw diameter(mm) | 88 | 125 | 175 |
| Filter screen aperture(mm) | 0.6 | 0.6 | 0.6 |
| Rotate Speed(r/min) | 380 | 380 | 380 |
| Voltage(V) | 380V 50HZ | 380V 50HZ | 380V 50HZ |
| Material | Stainless steel 304 | Stainless steel 304 | Stainless steel 304 |
